<

How To Make Mesh Corset

Table of Contents

How to Make a Mesh Corset

A corset is a piece of clothing that has been used throughout history to cinch the waist and create an hourglass figure. While traditional corsets were made of heavy fabrics and boning, modern corsets can be made from a variety of materials, including mesh. Mesh corsets are lightweight and breathable, making them ideal for warmer weather or for anyone who wants a more comfortable alternative to traditional corsets.

In this article, we will go over how to make a mesh corset from start to finish. We will cover everything from selecting the right materials to finishing touches, so you can create a beautiful and functional corset that fits you perfectly.

Materials Needed

Before you start making your mesh corset, you will need to gather a few materials. Here is a list of the essentials:

  • Mesh fabric
  • Lining fabric
  • Boning (plastic or steel)
  • Grommets
  • Lacing cord
  • Bias tape
  • Sewing machine
  • Scissors
  • Pins

Choosing Your Mesh Fabric

When selecting your mesh fabric, you will want to choose a fabric that is sturdy enough to hold its shape but also lightweight and breathable. Look for a mesh fabric that has a bit of stretch so that it will be comfortable to wear. Some good options include power mesh, stretch mesh, and fishnet.

Creating Your Pattern

Once you have your fabric, you will need to create a pattern for your corset. You can find corset patterns online or you can create your own. If you are creating your own pattern, you will need to measure your bust, waist, and hips. You will also need to decide how long you want your corset to be.

READ ALSO:  How Much Does Scan Cost In Nigeria

To create your pattern, draw a rough sketch of your corset on paper. Start by drawing the front and back pieces separately. Then, draw the side pieces and any additional pieces you need, such as the busk panel or the modesty panel.

Cutting Your Fabric

Once you have your pattern, you can start cutting your fabric. Cut out each piece of the corset from both the mesh fabric and the lining fabric. Make sure to cut the lining fabric slightly smaller than the mesh fabric to allow for seam allowances.

Sewing Your Corset

To sew your corset, start by sewing the mesh fabric and lining fabric together along the top and bottom edges of each piece. Then, sew the boning channels into the lining fabric. Insert the boning into the channels and stitch them closed.

Next, sew the back and front pieces together at the center back seam. Sew the side pieces to the front and back pieces, making sure to match up the seams.

Add any additional pieces, such as the busk panel or modesty panel, by sewing them into place.

Finally, bind the edges of the corset with bias tape. This will give your corset a finished look and help prevent the edges from fraying.

Adding Grommets and Lacing

To finish your corset, you will need to add grommets and lacing. Start by marking where you want your grommets to go. Use a grommet setter to insert the grommets into the fabric.

Finally, lace up your corset using your lacing cord. Make sure to pull the lacing tight enough to cinch your waist but not so tight that it is uncomfortable.

READ ALSO:  How Much Is From Nigeria To India

Conclusion

Making a mesh corset can be a fun and rewarding project. With the right materials and a bit of patience, you can create a beautiful and functional garment that fits you perfectly. Just remember to take your time and follow the steps carefully.

FAQs

  1. Can I use steel boning instead of plastic boning?

Yes, you can use steel boning instead of plastic boning. Steel boning is more durable and will provide more support, but it can also be more expensive.

  1. What is bias tape?

Bias tape is a strip of fabric that has been cut on the bias, or diagonal, of the fabric. It is used to bind the edges of a garment and give it a finished look.

  1. Can I adjust the fit of my corset after it is made?

Yes, you can adjust the fit of your corset by tightening or loosening the lacing. If you need to make more significant adjustments, you may need to take the corset apart and alter the seams.

  1. How do I clean my mesh corset?

To clean your mesh corset, hand wash it in cold water with a mild detergent. Hang it up to dry, and avoid putting it in the dryer or using an iron on it.

  1. Can I wear a mesh corset as outerwear?

Yes, you can wear a mesh corset as outerwear if you style it appropriately. For a more casual look, wear it over a T-shirt or tank top. For a dressier look, pair it with a skirt or dress pants.